I30N Intercooler with ABE / Combinability
Combinability: Registration-free as a spare part or in combination with the following products:
- BoostTown Open Intake 275HP i30N
- BoostTown Open Intake 280HP i30N
- BoostTown Snorkel – all models
What should I buy?
You can choose between:
- intercooler only
- Intercooler + turbo pipe
- Intercooler + pipe to throttle body
- Intercooler + both pipes
Our recommendation:
If you want to run the system as we developed it, take the intercooler with you. both 3-inch pipes.
Important to know:
All variants are optional listed in the ABE. So you can start with just the intercooler and retrofit the pipes later. However, they are cheaper as a set.
Short description – you can find the nerdy long version under the video
The standard intercooler and original pipes quickly become a bottleneck under heavy load. Hot intake air and rising exhaust temperatures put additional strain on the entire system and lead to a loss of performance.
Our BoostTown intercooler provides a solution here – thanks to the ABE, it requires no registration – both as a standalone part and in combination with our other products.
The air is cooled, which allows more oxygen to enter the engine. We also reduce back pressure. With these two effects, we relieve the load on the entire car.
The intercooler also functions as a standalone part. However, the system truly becomes special as it was developed – in combination with our optional 3-inch pipes.
In our test, the intake air temperature was only 5 °C above ambient temperature!
This is exactly what makes our system stand out so clearly:
fewer constrictions, smoother transitions, and a cleanly designed overall system from the charge air system to the throttle body. This helps to reduce turbulence and pressure loss, and effectively relieve the system.
- with ABE (no registration required)
- developed as a complete system
- 3 inch piping
- huge relief for the system
- significant reduction in intake air temperature
- Lightweight
- Combiable with existing and upcoming products
In detail:
Do you like data and technology? Then have fun with the long version!
The original intercooler, due to its small surface area and limited volume, does not have enough capacity to sufficiently cool the air heated by the turbocharger during compression. If the charge air temperature increases, its density decreases.
This means: At the same pressure, less oxygen reaches the combustion chamber. You notice this especially in performance-enhanced vehicles. When i30N However, this problem unfortunately already shows up in the standard condition – especially in midsummer or whenever the vehicle is stressed for a longer period, for example on the racetrack, on the highway, or on mountain passes.
But that's only one side of the story. The pressure loss in the system is at least as important.
Boost pressure is not measured directly at the turbocharger, but rather in the intake manifold at the engine. If there are bottlenecks or strong turbulences on the way there, the turbocharger has to work harder so that the required amount of air still reaches the engine. In practice, this means: higher turbocharger speed (which generates more heat) and higher system load.
The throttle body has a diameter of 70 mm. However, the complete system before it remains at 50mm before the intercooler and approximately 52 mm or 57 mm (facelift) after the intercooler as standard for a long time. The fact that Hyundai has already increased this area in the facelift is a clear indication that there is a bottleneck here as standard, leading to a loss of performance – even with standard power!
That's precisely why our entire system was consistently designed for 3 inches.
Why not 2.75 inches? Because a pipe always creates a pressure loss. The flow is slowed down at the edges, making the usable cross-section in practice smaller than the purely measured diameter. Therefore, it often makes sense to deliberately design it a little larger than the pure target dimension.
We are therefore switching to 3 inches as early as possible. This is precisely what the pipe on the hot side is designed for, referred to as the turbo pipe at the top. It expands the diameter early from the standard 50 mm to 3 inches, providing a smoother transition instead of abruptly expanding the air via a silicone connector just before the intercooler.
If the system is designed for 3 inches at this point, this diameter must, of course, also be consistently maintained. Therefore, the intercooler connection also grows to 3 inches. This is precisely one of the reasons why our cooler fits to the millimeter and why the core is minimally shorter in length than with some other manufacturers. For us, however, the biggest number on paper was not decisive, but rather the most aerodynamically favorable overall concept possible.
When it comes to the core, we rely on tube & fin. Our intercooler weighs only 8.77 kg. This is also part of our approach: not just to build as massive as possible, but to create a well-thought-out ratio between core size, flow characteristics, and weight.
Perhaps at this point you are wondering what the openings in the air baffle are all about. We can only say this much about it at the moment: the topic is still a work in progress – and once again something that has never existed with expert reports before.
The outlet of the intercooler is also designed for 3 inches, just like the subsequent pipe.
The pipe to the throttle body has a particularly large effect on the overall system. On the 275 hp i30N, the original outer diameter here is 52 mm, and on the 280 hp i30N, it's 57 mm. This is precisely where many setups create a clear bottleneck: the air expands in the large intercooler, leaves the cooler at 3 inches, and then has to go into a... 52mm pipe? This again creates pressure losses that we so painstakingly avoided before!
That's exactly what we want to avoid.
Our pipe to the throttle body offers a 2.22 times larger cross-section compared to the original (52mm). This way, the diameter remains significantly more generous even after the intercooler, instead of having to force the air directly through an unnecessarily small area including an additional transition.
Additionally, the pipe features a 1/4″ NPT connection with an adapter to 1/8″ NPT. This allows for clean integration of extensions such as water-methanol injection, NOS, or other applications as needed.
From the outset, it was important to us to design this system not only to be technically sound but also legal and flexible. That's why we've optionally included all components (and our other products with ABE) in the ABE.
So you can decide for yourself how you want to set up your system:
only the intercooler, the intercooler in combination with a pipe, or the complete system with both pipes.
So, as we've developed the system, the complete solution is the most consistent option.
In this configuration, the intake air temperature in our test was only 5°C above the ambient temperature – compared to 27°C above ambient temperature in the stock condition.
At the same time, it remains flexible: the pipes can also be purchased individually later. However, there will be an additional charge in retrospect because different silicone connectors are required depending on the configuration.
In summary:
- ABE – registration-free as a single part or in the approved combinations
- Compatible with existing and future products
- Developed as a complete system
- Designed consistently for 3 inches – from the beginning of the intercooler pipe to the throttle body
- Fewer constrictions and smoother transitions – for an aerodynamically efficient overall system
- Tube-and-Fin Netting – Powerful yet Lightweight
- Only 8.77 kg – lighter than many alternatives
- Pipe to throttle body with 1/4″ NPT connection including adapter to 1/8″ NPT
- Pipes can be retrofitted later – cheaper in a set
Thanks for reading our Nerd Talks.
Switzerland: Customers from Switzerland please visit our CH-Shop at www.boosttown.ch.
Any questions? We are constantly developing new and improved products. If you're looking for legal tuning parts, BoostTown is your first port of call. Follow us on Instagram and Facebook for updates on more legal parts with great combination possibilities!
Have fun with the installation
Your BoostTown team

Reviews
There are no reviews yet.